Base Map
$150
A 30-minute consultation and a base calibration prepared for your ECU and vehicle combination.
Choose Package
Haltech Remote Tuning
Get a Haltech calibration built around your engine, injectors, fuel, and sensors. Start with a custom base map or add live teleconference support to check the first start and work through remote tuning.
Haltech Tuning Packages
Every package starts with a 30-minute consultation to review your intake and plan the base map. Startup and full remote tuning sessions are live teleconferences. Prices are in USD.
Base Map + Startup Session
$350
Consultation and base map, plus a live teleconference startup session to check sensors, idle, and first-run behavior.
Choose PackageBase Map + Full Remote Tuning Service
$750
Consultation, base map, and startup support, followed by live teleconference tuning with data review and calibration revisions.
Choose PackageComplete the build intake, then choose your initial consultation in Calendly. Payment through Stripe confirms the appointment; the tuner receives your paid intake for review.
Your Haltech ECU & Software
Record the exact Haltech ECU model and the software and firmware currently on the car. Haltech setups may use NSP or ESP depending on the system and configuration. Include those details and your existing map status so the tuner can review the combination during the initial consultation.
Haltech software & setup guidanceBefore Your Session
ECU Connection & Map
Check that your tuning computer can communicate with the Haltech ECU using the software appropriate for the current setup. Keep your existing map available and note the software version in the intake.
Sensors & Fuel System
List injector, MAP sensor, and wideband models, along with your fuel type. Include boost hardware, engine and transmission specifications, and any sensor readings or symptoms that need attention.
Remote Access & Preparation
Prepare reliable internet, a working ECU connection, and remote computer access for live sessions. Watch the Haltech Introduction and AnyDesk guides in Resources before your scheduled consultation.
Haltech Tuning Questions
Should I list NSP or ESP in my intake?
Yes. Include whichever Haltech software your current setup uses, plus the exact ECU model and firmware version. Do not change firmware just to book a session; give the tuner the existing setup details so compatibility can be reviewed.
Is the Haltech startup session live?
Yes. The $350 Base Map + Startup Session package adds a 1-2 hour live teleconference session to the consultation and base map. The tuner works with you on first-run checks, sensor behavior, idle quality, and fueling before further tuning.
What does the $750 Haltech full package add?
It includes the consultation, base map, and startup support, followed by a live remote tuning session using dyno or street data. Data review and calibration revisions focus on the vehicle combination and intended use you describe in the intake.